Back to New CenterCleaning robots are very convenient household appliances that can help us solve the dull task of sweeping the floor in our daily lives. However, it is still an artificial robot. After long-term use, some minor problems are inevitably going to occur. Now, I will share with everyone the common faults and solutions of cleaning robots. Let's take a look at the common faults and solutions of cleaning robots together.
Proscenic Cleaning Robot
- No Response when Turned on For many novice users, the inability to turn on the machine is normal because they often think that the cleaning robot has quality problems, as they do not understand the machine. The reason why the cleaning robot cannot be turned on may be due to insufficient charging or power to turn on the machine.
Solution:
- Many cleaning robots have a switch key at the bottom. Before charging, check whether the switch key is in the off position, as the switch key cannot be charged.
- When charging, check whether the cleaning robot is in contact with the charging base and whether the connected power cord is loose or disconnected.
- After the cleaning robot is fully charged, if the power on the robot is not turned off after unplugging the charging base, it can cause insufficient power and the machine cannot be turned on.
If it is not due to the above reasons, then the mainboard needs to be replaced. However, not all cleaning robots can replace the mainboard. Therefore, before replacing the mainboard, you should ensure that the cleaning robot you purchased has a warranty period, which highlights the advantages of the brand. The Proscenic Cleaning Robot LDSM7 main unit has a one-year warranty, motor warranty for one year, battery warranty for one year, and all accessories are warranted for one year. When you encounter an unsolvable problem, please send the machine back to the manufacturer. Proscenic is a good quality assurance brand.
Proscenic Cleaning Robot Quality Guarantee
- The Cleaning Robot Cannot Sweep When the cleaning robot is turned on but cannot clean, it is also a very annoying problem. The reason why the cleaning robot cannot sweep may be that the main brush does not rotate, the side brush does not rotate, or the main brush is entangled with foreign objects.
Solution:
- Check whether the main brush is entangled with foreign objects. At this time, you only need to remove the entangled material.
- The side brush screw is not rotated tightly, which causes it to be unable to rotate, or the side brush screw is rotated too tightly, causing the screw to fail.
Proscenic Cleaning Robot
- Residual Garbage on the Floor The appearance of a cleaning robot is to clean the floor. If even the floor cannot be cleaned, there is often a reason for it. Excessive dust in the dustbin may cause garbage that cannot be cleaned on the ground, and foreign objects may also entangle the rolling brush or drive wheel.
Solution:- Check whether the machine is stuck in a corner or under furniture, causing it to stop working.
- Check whether the battery is low and needs to be charged.
- Check whether the wheels are stuck due to debris, and clean them.
- Restart the machine after a few minutes of rest.
Proscenic Cleaning Robot Dustbin
When the cleaning robot is working, it suddenly stops working, mainly because the power is exhausted, and it will automatically shut down.
Solution:
- Check whether the cleaning robot is working in the reserved cleaning mode. The cleaning robot will work in a fixed-point mode at a specified time.
- Check whether the cleaning robot has an automatic charging function. If not, check whether the cleaning robot is out of power. After the power is used up, it will automatically shut down and stop working. At this time, manual charging is required.
To avoid this problem, many cleaning robots have added an automatic charging function. Proscenic Cleaning Robot LDSM7 will automatically return to the charging base for charging when the power is less than 20%, and will return to the breakpoint to continue cleaning after being fully charged. Therefore, before purchasing a cleaning robot now, you must know clearly what functions the cleaning robot has, which will save you a lot of trouble in the future.
